Menu
  • Classic Joe Image
Classic Joe Image

Off Grid - Smaller Vehicle Deliveries 

 

image-isuzu

Free ~ Fast ~ Friendly ~ Reliable Service ~ Delivered & Stacked!

 

Bulk Blown Deliveries ~ Delivered directly to your hopper storage on our specialized Bulk Blow Vehicle 

                    Burn-Best-Tanker-2        

Instant Quote over the phone 01422 646839

 

 Parcel Deliveries

3 - 5 Working day or select Next Day at checkout

 

  Pallet Network Deliveries

image006

 Free ~   Kerbside Delivery ~ Pallet Truck and Tail Lift 

 

By ordering on line you are agreeing to Delivery Terms & Conditions 

   Please Contact the office to discuss your delivery requirements on 01422 646839

Effects of Cancellation

If you cancel this contract, we will reimburse to you the all the payments received from you. Where you are unable or unwilling to arrange the return of the goods yourself, or where the goods have suffered a material reduction in value due to your handling of the goods, we will reduce the value of your reimbursement by the appropriate value.



Once the product has been dispatched from our warehouse, you the customer, will be responsible for the costs associated with returning the order to our warehouse. Where you are unable or unwilling to arrange the return of the order, Millhouse Wood will arrange for the return at the following cost:

In the case of the product being returned from the area where delivery costs are included in the price, the amount of £80 +VAT per pallet will be charged.



In the case of the product being returned from an area that requires a delivery surcharge, £80 + the surcharge value +VAT per pallet will be charged.



We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you (including removing bags from the pallet, and not restacking them correctly, and/or damage to packing materials). We will only reduce the reimbursement in this case by the loss of value to the goods.



We will make the reimbursement without undue delay, and not later than 21 days after we receive the goods back to our warehouse.



We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of the reimbursement.


Defective Goods and Returns

It is your responsibility to ensure that the goods are suitable for the use to which you put them to.



In the unlikely event that the goods provided do not conform to these terms, please let us know. If the goods do not conform we will:



Remove the goods at our cost and provide you with a full refund for the value of the goods that have been removed; or



Replace the goods at our cost.



Dissatisfaction with goods delivered. If you are dissatisfied with the goods delivered, but the goods do conform to these terms and you would like to return the goods we will collect the goods and provide a refund to you provided:



The goods are returned to us in a saleable condition;



At least 75% of the original order is returned.



We will refund you the full value of the goods returned to us less £80 + VAT per pallet for the transport costs incurred (and shipping surcharges where they occur), returning the goods to our warehouse.



These terms and conditions apply to any replacement goods that we may send you.



If your order is being returned it is your responsibility to ensure adequate access for our haulier to collect the goods. Where appropriate access is not given, we will pass on any additional haulage costs to you.


Classic Joe

crafted to perform better and last longer

Product Size
Quantity

46.5" W X 48" H X 28" D

£909.00

ClassicTM 18″

The kamado that set a new high standard for craftsmanship and innovation, our Kamado Joe Classic features a thick-walled, heat-resistant shell that locks in smoke and moisture at any temperature. Beneath the easy-open dome, a large cooking surface crafted from commercial-grade 304 stainless steel provides ample space for 10–12 fillets or chicken breasts. Other standard features include a flexible Divide & Conquer cooking system, a heavy-duty rolling cast iron cart, a precision ventilation dial and a patented slide-out ash drawer for easy access and cleaning.

 

 

 

  • Premium Ceramic Grill with Cast Iron Cart & Locking Wheels
  • Built-in Thermometer
  • Finished Folding HDPE Side Shelves/Handle
  • Divide & Conquer Flexible Cooking System
  • Patented Slide-Out Ash Drawer
  • Grill Gripper
  • Ash Tool

 

 

  • Dimensions: 46.5" W x 48" H x 28" D
  • Cooking Surface: 18” diameter / 254 sq. in.
    • With Grill Expander: 406 sq. in.
    • With Two Sets of Grates: 508 sq. in.
    • With Both Grates & Grills Exapnder: 660 sq. in.
  • Weight: 188 lbs.
  • Heat Range: 225°F – 750°F

 CHARCOAL & AIR FLOW

  1.  To get started with Kamado Joe, build a mound of charcoal that starts just below the holes in the side of the fire box with the peak of the mound just below the top of the Kamado Joe fire ring.
  2. Build the mound with large chunks at the bottom and smaller ones as you build it. Dumping charcoal directly into the Kamado Joe will allow small pieces to block the air holes in the fire grate, which can prevent you from reaching grilling and searing temperatures.
  3. Charcoal in Kamado Joe can be relit 2-3 times for multiple cooks. Use the ash tool Kamado Joe to stir the used charcoal, so the ashes will drop through the fire grate. Add 1/3 new charcoal to the existing charcoal in Kamado Joe and build a new mound. This works for well for roasting and grill temperatures. A full fire box of only fresh charcoal is recommended for  Kamado Joe smoking and searing temperatures.

Charcoal Tip: You can’t have too much charcoal in a Kamado Joe, but you can have too little.

LIGHTING

  1. Light the Kamado Joe charcoal with a fire starter cube or two, chimney starter, electric starter or other method like waxlings.
  2. Open the bottom draft door and leave the dome up.
  3. Wait 8-10 minutes for the Kamado Joe charcoal to build a small bed of embers.
  4. Close the Kamado Joe dome, open the top vent fully and adjust the air flow as needed as you near the target temperature 

Lighting Tip: Never use lighter fluid or any other combustible liquid.

TEMPERATURE

  1. For “low and slow” temperatures in  like 225°F, start with a very small fire in one area of the charcoal.
  2. Close the lid and allow the temperature to come up slowly with the draft door open 2” and the top vent open 1/2” and the daisy wheel holes fully open.
  3. This method may take 30-45 minutes to reach your target temperature, but it will ensure a long and slow cooking period

Low Temperature Tip: It is easy to raise the temperature, but very difficult to lower the temperature if you go over your target temperature

COOKING INSTRUCTIONS

  1. Place the heat deflector on a level surface with the ceramic plate in the bottom position.
  2. Place a Kamado Joe drip pan no more than 3″ deep between the ceramic plate and frame of the heat deflector. Insert them into the grill.
  3. Fill the Kamado Joe drip pan with 2 liters of Dr. Pepper® or Coke® and add enough water to fill 3/4 of the pan. You can just use water.
  4. Place the cooking grate on top of the heat deflector frame and place the meat directly on the grate.kamado_joe_divide_and_conquer Halifax  17032
  5. Insert the Kamado Joe temperature probe if you are Using a Thermometer.
  6. Leave the bottom Kamado Joe draft door and top vent fully open until the grill reaches 200°F (93°C). This may take 45 minutes or more.
  7. Close the  Kamado Joe draft door to a 2″ opening and close the top vent with just the daisy wheels fully open.
 

Off Grid - Smaller Vehicle Deliveries 

 

image-isuzu

Free ~ Fast ~ Friendly ~ Reliable Service ~ Delivered & Stacked!

 

Bulk Blown Deliveries ~ Delivered directly to your hopper storage on our specialized Bulk Blow Vehicle 

                    Burn-Best-Tanker-2        

Instant Quote over the phone 01422 646839

 

 Parcel Deliveries

3 - 5 Working day or select Next Day at checkout

 

  Pallet Network Deliveries

image006

 Free ~   Kerbside Delivery ~ Pallet Truck and Tail Lift 

 

By ordering on line you are agreeing to Delivery Terms & Conditions 

   Please Contact the office to discuss your delivery requirements on 01422 646839

Effects of Cancellation

If you cancel this contract, we will reimburse to you the all the payments received from you. Where you are unable or unwilling to arrange the return of the goods yourself, or where the goods have suffered a material reduction in value due to your handling of the goods, we will reduce the value of your reimbursement by the appropriate value.



Once the product has been dispatched from our warehouse, you the customer, will be responsible for the costs associated with returning the order to our warehouse. Where you are unable or unwilling to arrange the return of the order, Millhouse Wood will arrange for the return at the following cost:

In the case of the product being returned from the area where delivery costs are included in the price, the amount of £80 +VAT per pallet will be charged.



In the case of the product being returned from an area that requires a delivery surcharge, £80 + the surcharge value +VAT per pallet will be charged.



We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you (including removing bags from the pallet, and not restacking them correctly, and/or damage to packing materials). We will only reduce the reimbursement in this case by the loss of value to the goods.



We will make the reimbursement without undue delay, and not later than 21 days after we receive the goods back to our warehouse.



We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of the reimbursement.


Defective Goods and Returns

It is your responsibility to ensure that the goods are suitable for the use to which you put them to.



In the unlikely event that the goods provided do not conform to these terms, please let us know. If the goods do not conform we will:



Remove the goods at our cost and provide you with a full refund for the value of the goods that have been removed; or



Replace the goods at our cost.



Dissatisfaction with goods delivered. If you are dissatisfied with the goods delivered, but the goods do conform to these terms and you would like to return the goods we will collect the goods and provide a refund to you provided:



The goods are returned to us in a saleable condition;



At least 75% of the original order is returned.



We will refund you the full value of the goods returned to us less £80 + VAT per pallet for the transport costs incurred (and shipping surcharges where they occur), returning the goods to our warehouse.



These terms and conditions apply to any replacement goods that we may send you.



If your order is being returned it is your responsibility to ensure adequate access for our haulier to collect the goods. Where appropriate access is not given, we will pass on any additional haulage costs to you.